965EN

Key Features:

These modules are designed to provide an isolated Ethernet network interface for up to six input channels. With Differential inputs that eliminate ground noise and Multi-range inputs accept signals from a variety of sensors and devices. In addition this module ensures High-resolution, low noise, A/D and delivers high accuracy and reliability.

• Configurable from standard web browser
• EtherNet/IP® or Ethernet Modbus TCP/IP communication with automatic
10/100Mbps data rate negotiation
• 6-input stand-alone module is very economical
• i2o function enables direct input-to-output communication without a network controller
• Universal inputs support a variety of sensors
• Built-in CJC sensor on each terminal block produces more precise temperature measurements
• Thermocouple break detection (upscale or downscale) identifies sensor wiring failures
• High-resolution 16-bit sigma-delta A/D converters ensure precise, high accuracy measurements
• Compact packaging with pluggable terminals
• Wide operational temperature range: -25°C to +70°C (-13° to +158°F)
• Approvals: CE/ATEX marked; UL, cUL listed, Class 1 Div 2 Groups
A, B, C, D; EtherNet/IP, Modbus/TCP conformance tested.

Product Details

Input Ranges
– Ranges are selectable for a 3-channel group.
Thermocouple (user-selectable type)
– Type J, K, T, R, S, E, B, or N.
DC Millivolts (user-selectable range)
– ±100mV or ±1V DC.
Network Communication
– EtherNet/IP or Modbus TCP/IP 10/100Mbps with automatic data rate negotiation.
Power Requirement
– 15 to 36V DC supply (2 Watts) required.
Approvals
– CE/ATEX marked.
– UL, cUL listed, Class I; Div. 2; Groups A, B, C, D.
– EtherNet/IP, Modbus/TCP conformance tested.
Noise Rejection
– Normal Mode: Better than 40dB @ 60Hz.
– Common Mode: Better than 140dB @ 60Hz.
Input Filter Bandwidth
– -3dB at 3Hz, typical.
Input Conversion Rate
– 80mS per channel.
Ambient Temperature and Humidity
– Operating: -25 to 70°C (-13 to 158°F).
– Relative humidity: 5 to 95%, non-condensing.
Isolation
– 1500V AC for 60 seconds or 250V AC continuous.
– 3-way isolation between I/O, network, and power.
SOLUTIONS

NEWSLETTER