972EN

Key Features:

These modules are designed to provide up to six channels of analog output with Multi-range outputs support a wide variety of industrial devices.
They can drive displays and recorders, control drives, or send analog signals to other systems.
In addition this modiule ensures High-resolution, low noise and deliver high accuracy and reliability.

• Configurable from standard web browser
• EtherNet/IP™ or Ethernet Modbus TCP/IP communication with automatic
10/100Mbps data rate negotiation
• 6-input stand-alone module has much lower start-up cost than multi-piece block I/O systems
• i2o function enables direct input-to-output communication without a network controller
• Universal DC outputs support a wide variety of signals and industrial devices
• Three selectable failsafe modes (0%, last-state, or pre-defined) help prevent unsafe conditions
• Compact packaging with pluggable terminals saves space and simplifies wiring
• Wide operational temperature range permits installation in extreme environments:
– 972EN: -25°C to +60°C (-13°F to +140°F)
– 973EN: -25°C to +70°C (-13°F to +158°F)
• Approvals: CE/ATEX marked; UL, cUL listed, Class 1 Div 2 Groups A, B, C, D; EtherNet/IP, Modbus/TCP conformance tested.

Product Details

Input Ranges
– ±20mA, 0-20mA, 4-20mA DC (selectable on each channel).
Ethernet Communication
– Modbus TCP/IP, 10/100Base-T(X), i2o peer-to-peer.
Power Requirement
– 18 to 36V DC, 2.4W.
Approvals
– CE, UL/cUL (industrial-grade units only).
– Zone 2, Class 1, Division 2, ABCD.
Accuracy
– 967EN-4008: Less than 0.05% of range.
– 967EN-4C08: Less than 0.10% of range.
Input Impedance
– 200 ohms.
Operating Temperature and Humidity Ranges
– 967EN-4008: -40 to 70°C (-40 to 158°F).
– 967EN-4C08: 0 to 55°C (32 to 131°F).
– Relative humidity: 5 to 95%, non-condensing.
Isolation
– 3-way isolation of I/O, power, network circuits.
– Peak: 1500V AC, ANSI/ISA-82.01-1988.
– Continuous: 250V AC, 354V DC.
SOLUTIONS

NEWSLETTER