DeviceMaster RTS 4-Port RJ45

Key Features:

The DeviceMaster RTS 4-Port RJ45 is an eight-port device server designed to enable serial devices to be placed anywhere on the Ethernet. The DeviceMaster RTS 4-Port RJ45 is used in applications where connecting legacy serial devices to a PC without software changes is a requirement
A pair of device master RTS can be used to create a point-to-point serial tunnel across the network that seamlessly transfers serial data via TCP or UDP socket connections.

• No serial cable distance limitations enables communication between a host PC and serial devices located anywhere across an Ethernet network
• Software selectable RS-232/422/485 serial interfaces
• Supports native COM, TTY, or TCP/IP Socket communication modes
• Web-based configuration makes setup and management changes quick and easy
• Real-time e-mail event notification alerts administrator of potential connection and security issues
• Temperature rated for extreme conditions (-37° to 74°C)
• Rugged stainless steel housing enables DIN rail or panel mounting
• PortVision® DX monitoring and management software automatically monitors devices on the network and enables user to view status, update firmware and resolve issues remotely
• Software developer kit available for users interested in writing custom applications to run on the DeviceMaster platform
• NEMA TS2 compliant
• RoHS2 compliant under CE
• IPV6 support

Product Details

Hardware


Bus Interface Specification 10/100BASE-T
Memory
– SDRAM 8MB
– Flash 4MB
Enclosure Black Finished Steel
Installation Method Panel Mountable
LED Indicators 100MB Ethernet, Collision, Ethernet Link/Activity, RX/TX per port, and Status
Dimensions
– 10.8″ x 1.5″ x 6.3″
– 27.43 x 3.81 x 16
Product Weight
- 4.47 lbs
– 2.03 kg

Electrical Specifications


Device
– DC Input Voltage9-30 VDC
– Current Consumption+24VDC 200 mA
– Power Consumption (maximum)4.8 W
• Comtrol External Power Supply
– Output Voltage9-30VDC V
– Output Current+24VDC 500 mA
– Line Frequency47-63 Hz
– Line Voltage90-264 VAC
• ESD Surge Protection
Provides minimum of 15KV for all serial lines. All Ethernet components are rated to 1.5KV magnetic surge protection.

Environmental Specifications


Air temperature
– System On -37 to 74° C
– System Off -40 to 85° C
Operating Humidity (non-condensing) 5% to 95%
Altitude 0 to 10,000 Feet
3,048 m
Heat Output 16.4 BTU/Hr
MTBF (Mean Time Between Failures) 25.0 Years

Serial Communications


Connector Type DB9M/RJ45F
Number of Ports 4
Software Selectable Interfaces
– RS-232, RS-422, or RS-485
Baud Rate 300 bps to 230.4 kbps
Receive Buffer 1024bytes
Transmit Buffer 256bytes
Device Driver Data Control
Data Bits 7 or 8
Parity odd, even, or none
Stop Bits1 or 2
Flow Control Hardware, Software, or None

Ethernet Specifications


Network Protocols
ARP, BOOTP, DHCP, HTTP, ICMP, Ping, RARP, RFC 1006 (ISO over TCP), RFC 2217, SNMP (MIB-II), TCP/IP & UDP socket services, Telnet, TFTP, and supports IP multicast data transmission
Connector Type RJ45F
Number of Ports 2

Features


SNMP Support MONITORING ONLY.
Other Event notification and Watchdog
Manufacturer’s Warranty 5 Years

Regulatory Approvals


Emissions Canadian EMC requirements
- ICES-003
– CISPR-22
– European Standard EN55022 FCC Part 15 Subpart B Class A limit

Immunity European Standard EN55024
- IEC 1000-4-2/EN61000-4-2: ESD
– IEC 1000-4-3/EN61000-4-3: RF
– IEC 1000-4-4/EN61000-4-4: Fast Transient
– IEC 1000-4-5/EN61000-4-5: Surge
– IEC 1000-4-6/EN61000-4-6: Conducted Disturbance
– IEC 1000-4-8/EN61000-4-8: Magnetic Field
– IEC 1000-4-11/EN61000-4-11: Dips and Voltage Variations

Safety
- IEC 60950/EN60950
– CSA C22.2 No. 60950/UL60950 Third Edition

SOLUTIONS

NEWSLETTER