Fast Ethernet and Gigabit Ethernet

Key Features:

Fast Ethernet and Gigabit Ethernet Bridging Converter

• Optional converter or bridging function (via DIP-switch)
• Power-over-Ethernet optional
• Automatic speed adjustment per Auto Negotiation
• Integrated Auto Crossover function for use of standardized patch cable
• Link Through function
• SFP-Slot for 1000Base-X (GBE version)
• Optional for extended temperature range -40 to +75 °C

Product Details

General


Type RJ-45 to Fiber Media Converter
Performance Store-and-forward, RJ-45 port support Auto MDI/MDI-X Function
MAC-Adresses max. 9,216 bytes

Local Ports (Twisted-Pair)


Number of Ports 2
Type 1 Fast/ Gigabit Ethernet (only MS655099/X) 1 Fiber
Connector RJ-45 jack, different fiber ports (depending to the model)
Cable Type Twisted-Pair cable, category 5e, impedance 100 Ohm, length max. 100 m
Flow Control Flow Control and Back pressure
Pinout Auto MDI/MDI-X
Power-over-Ethernet IEEE802.3af Power over Ethernet, max 15,4W (only MS655060P(X)-48, MS655062P(X)-48)

Uplink (Pluggable Transceiver)


Number of Ports 1 (only MS655099(X))
Type 1000M SFP Multi/Single Mode
Connector SFP slot

Uplink (Fixed Optical Transceiver)


Number of Ports 1
Type Fast Ethernet 100Base-FX
Connector SC
Fiber Cable Type MS655060(X), MS655060P(X)-48: Multimode 1310nm SC
MS655062(X), MS655062P(X)-48: Singlemode 1310nm max 30km SC
Distance Multimode: 550 m
Single Mode: 30 km
actual distance may depend on fiber performance
Flow Control Pause frames (IEEE 802.3x), configurable

Uplink (Twisted-Pair)


Number of Ports 1
Type Fast Ethernet 10/100Base-TX
Connector RJ-45 jack, shielded
Cable Type Twisted-Pair cable, category 5e, impedance 100 Ohm, length max. 100 m
Pinout Auto MDI/MDI-X
Power-over-Ethernet only MS655060P(X)-48 MS 655062P(X)-48:
Power Sourcing Equipment(PSE) IEEE 802.3af class 0, max. 15.4 W pinout wires 1/2 (+), 3/6 (-)

Display


Type 7 LEDs, color coded
Power P1/P2 green on/off
Link LNK/ACT (RJ-45 / fiber port) green
on: Connected to network
flashing: Networking is active
off: Not connected to network
Status FDX/COL (fiber port) yellow
on: Full-duplex mode
flashing: Packet collision occured
100M (RJ-45) yellow
on: Link to 100Mbps network
off: Link to 10Mbps network

Power Supply (DC)


Input Voltage 12-48 VDC redundant (non PoE Version)
48 VDC redundant (PoE Version)
Power Consumption 3.3Watts (without PoE); 16.4Watts (Full load with PoE)
Connector Screw terminal

Environment


Operating Temperature -10..60 °C (standard model)
-40..75°C (“X” model)
Storage Temperature -40..85 °C
Relative Humidity 5..95%, non condensing

Mechanical


Dimensions 30 mm x 95 mm x 140 mm
Weight 438.5 g
Housing Color black
Mounting DIN35 rail, Wall

Standards Compliance


CE Mark CE EN61000-4-2 (ESD),
CE EN61000-4-3 (RS),
CE EN-61000-4-4 (EFT),
CE EN61000-4-5 (Surge),
CE EN61000-4-6 (CS),
CE EN61000-4-8,
CE EN61000-4-11,
CE EN61000-4-12,
CE EN61000-6-2,
CE EN61000-6-4
Safety CE/EN60950-1
Class 1 / Division 2
Other Free Fall IEC60068-2-32
Shock IEC60068-2-27
Vibration IEC60068-2-6
SOLUTIONS

NEWSLETTER