Fast Ethernet Micro Switch Twisted Pair Uplink

Key Features:

A fast Ethernet switch designed to permits the connection of four terminal devices to a fiber optic segment via twisted pair cable.
Beside the standard version with integrated 230 VAC power unit, there is an extended version available with Power-over-Ethernet and 48 VDC power connection. The PoE version can be supplied over the uplink port via PoE and is therefore completely independent of an external power supply.
• Versions with 5x and 6x 10/100TX
• Internal 230VAC power supply, optional PoE version with 48 VDC
• Easy expansion of the port capacity (1 to 4 ports)
• Easy administration (Web-, Telnet-, SNMP-interface and NMP Platform)
• VLANs, data prioritisation (QoS), authentication according to 802.1X
• Port based VLANs (traffic segmentation)
• Fast, tool-free mounting by snap-in installation
• Power-over-Ethernet for powering VoIP phones, IP cameras, WLAN, APs, etc. (PoE version)
• ِAlternative power supply via uplink port using Power over Ethernet (Powered Device)

Product Details

General


Type Fast Ethernet Switch Layer 2+, IEEE 802.3 compliant
Performance Store-and-forward, Full wire-speed, non-blocking on all ports
MAC-Adresses 2,048 addresses, automatic learning and aging
VLANs - Tagging IEEE 802.3ac
– Priorisation IEEE 802.1p
– VLAN IDs 0..4095
– Static and dynamic VLAN table
Quality of Service 4 hardware-queues per port prioritisation according to:
* IPv4/IPv6
* VLAN priority IEEE 802.1p
* port
queue weighting strict or weighted, configurable

Local Ports (Twisted-Pair)


Number of Ports Fast Ethernet, dual speed 10/100Base-TX
Type RJ-45 jack, shielded
Connector Twisted-Pair cable, category 5e, impedance 100 Ohm, length max. 100 m
Cable Type Pause frames (IEEE 802.3x), configurable
Flow Control Auto MDI/MDI-X, auto polarity
Pinout Auto MDI/MDI-X, auto polarity
Power-over-Ethernet For “PM”-Series, only:
Power Sourcing Equipment (PSE) IEEE 802.3af class 0, max. 15.4 W, forced-mode (legacy-devices), pinout wires 1/2 (+), 3/6 (-)

Uplink (Twisted-Pair)


Number of Ports 1
Type Fast Ethernet, dual speed 10/100Base-TX
Connector RJ-45 jack, shielded
Cable Type Twisted-Pair cable, category 5e, impedance 100 Ohm, length max. 100 m
Flow Control Pause frames (IEEE 802.3x), configurable
Pinout Auto MDI/MDI-X, auto polarity
Power-over-Ethernet For “PM”-Series, only:
Powered Device (PD)
IEEE 802.3af class 0, max. 15.4 W, forced-mode (legacy-devices), pinout wires 1/2 (+), 3/6 (-)

Display


Power “PM”-Series, only:
Local ports 1 to 4:
green: PoE sourcing
orange: PoE standby
red: PoE error
Link Local ports 1 to 4:
blinking: activity
green: authorized/forwarding
orange: blocked
red: unauthorized
Status Switch Status (S)
green: device ready
Link status uplink (5)
blinking: activity
green: authorized/forwarding
orange: blocked
red: unauthorized

Control Panel


Reset Button Reset of device, last saved configuration is reloaded
Config Button Pressed separately: Request IP-configuration for management agent.
Pressed together with reset-button: Reset to factory default settings, can be disabled

Power Supply (DC)


Input Voltage 44..57 VDC (48 VDC typ.)
Power Consumption Typ. 4 W (device only), max. 65 W (incl. PoE)
Connector 3 pin screw clamp, PE/-/+
Ground Terminal (PE) 6.3 mm flat-pin plug

Power Supply (AC)


Input Voltage 195..265 V AC (230 V AC typ.)
50..60 Hz (50 Hz typ.)
Power Consumption Typ. 4 W
Connector 3 pin screw clamp, PE/N/
Ground Terminal (PE) 6.3 mm flat-pin plug

Environment


Operating Temperature 0..40 °C
Storage Temperature -20..85 °C
Relative Humidity 10..90%, non condensing

Mechanical


Dimensions 90 mm x 45 mm x 57 mm (l x d x h, without connectors )
Mounting depth 33 mm
Weight 200g
Housing Color Standard color: pure white (alternative colors on request)

Standards Compliance


CE Mark 2004/108/EC (EMC)
2006/95/EG (Low Voltage)
Safety EN 60950-1:2006
Electromagnetic Emission EN 55022:2006
Electromagnetic Immunity EN 55024:1998
IEEE (Ethernet) 802.3i 10Base-T
802.3u 100Base-T
802.3x Flow Control
802.3ac VLAN Tagging
802.1D Spanning Tree
802.1Q Tagged VLANs
802.1p Packet Prioritisation
802.1w Rapid Spanning Tree
802.1X Network Access Control
RFC IPv4:

– RFC 791 (IPv4)
– RFC 826 (ARP)
– RFC 792 (ICMP)
– RFC 2131 (DHCP)
– RFC 2474/3260 (IPv4 DiffServ/IPv6 Traffic Class)
– RFC 4541 (IGMP)
– RFC 1769 (SNTP)
– RFC 1155/1156/1157 (SNMPv1)
– RFC 1901/1905/1906 (SNMPv2)
– RFC 3411/3412/3584 (SNMPv3)
– RFC 2574/3414 (USM)
– RFC 2575/3415 (VACM)
– RFC 2865 (RADIUS)
– RFC 2866 (Accounting)
– RFC 2868 (Tunnel Attributes)
– RFC 5424 (Syslog)

Reliability


MTBF 100,000 h
Method calculated, MIL-HDBK-217F

Additional Features


Software - Port Monitor
– CDP v1, v2
– Port based VLANs (traffic segmentation)
SOLUTIONS

NEWSLETTER