JetNet 3018G

Key Features:

The Korenix JetNet 3018G is an Industrial Switch, equipped with 16 RJ-45 10/100Mbps ports in addition to 2 10/100/1000TX with 1000-SX SFP combo ports that accepts all types of Gigabit SFP Transceivers.
This Switch is designed for applications requesting the transmission with large size files as it supports Jumbo frame transmission, up to 9216-bytes packet size.

• 16 10/100-TX and 2 Gigabit RJ-45/SFP combo ports (10/100/1000 Base-TX, 1000Base-X)
• Non-Blocking Switching Performance
• Supports up to 9,216 bytes Jumbo Frame Packet for secured large file transmission
• 2 Relay Outputs for Gigabit port Link Failure Detection
• IEEE 802.1p Quality of Service (QoS) for packet forwarding precedence
• Auto Gigabit RJ-45/SFP module detection
• IP31 rugged aluminum case
• Dual 24V (12-48V) DC power inputs
• Operating temperature -25~70oC

Product Details

Technology


Standard IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit Ethernet
IEEE802.3x flow control and back pressure
IEEE802.1p Class of Service

Performance


Switch Technology Store and Forward Technology, up to 12.8Gbps High System Throughput
MAC Address 8K MAC address table
System Packet Buffer 2Mbits shared packet buffer
Jumbo Frame Enable Jumbo Frame, Up to 9,216 bytes
Quality of Service CCompliance with IEEE802.1p class of service with Tag Based Priority rule.
Each switch port provides 4 priority queues as following – 8 (Higher) : 4(High) : 2(Low) :1(Lower) scheduling.
The Tag Priority ID as following: Highest (6,7), High (4,5), Low (0,3), Lowest (1,2)

Interface


Number of Ports 16 x 10/100 Base-TX with Auto MDI/ MDI-X function, ,Auto-Negotiation
2 x 1000Base-T supports Auto MDI/MDI-X , Auto- Negotiation function and combo with Small Form Factor Package (SFP) socket
Connectors  10/100 Base-TX: RJ-45
1000Base-T: RJ-45
SFP supports all 3.3v SFP type Gigabit fiber transceiver
Power 4-Pin Removable Terminal Block
Relay Output 4-Pin Removable Terminal Block
DIP 1 = Relay 1 = Port 17 Link Down
DIP 2 = Relay 2 = Port 18 Link Down
Cables RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The maximum link distance is 100 meters
Diagnostic LED System: Power 1, Power 2 (Green); Relay 1, Relay 2 (Red)
10/100/1000Base-T RJ-45: Link/Activity (Green/Green Blinking), Full Duplex/Collision (Yellow/Yellow Blinking)
Gigabit SFP: Link/Activity (Green/Green Blinking)
Relay Output: Relay Output 1 (Red), Relay Output 2 (Red)
10/100 Mbps RJ-45 port: Link (Green/Left), Activity(Yellow Blinking/Right)
1000Base-T RJ-45 port: 10/100 Link (Green/Left), 1000 Link (Yellow/Right), Activity (Green Blinking/Yellow Blinking)
SFP port: Link/Activity (Green/Green Blinking)

Power Requirements


Power Supply 4 pins terminal block for power input.
DC 24V (12~48V) with polarity reverse protection and redundant function
Power Consumption Max. 15 Watts

Mechanical


Installation DIN-Rail or Wall Mount
Case  Aluminum metal case with IP31 grade case protection for drop-waterproof and dustproof
Dimensions 137mm(H) x 96mm (W) x 129mm (D)
Weight 1 kg without package

Environmental


Operating Temperature -25 to 70°C
Operating Humidity 0% ~ 90% (Non-condensing)
Storage Temperature -40 ~ 85°C
Storage Humidity 0% ~ 95% (Non-condensing)
Hi-Pot 1.5KV

Regulatory Approvals


EMI FCC Class A, CE/EN55022.
EMS IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6,
IEC 61000-4-8
Safety UL508
Vibration  IEC60068-2-6
Shock  IEC60068-2-27
Free Fall IEC60068-2-32
MTBF At least 200,000 hours @ 25oC
Warranty 5 years
SOLUTIONS

NEWSLETTER