SmartStart – B&B Electronics

Key Features:

SmartStart LTE Cat.4 family of cellular routers and gateways are the perfect way to connect RS-232 and Ethernet devices to a cellular network. Industrial M2M and IoT applications include Ethernet lottery machines, ATM stations, kiosk locations, gaming terminals along with RS-232 traffic controllers, meters, UPS systems, PLCs and much more.
The processor is powerful enough to handle the full range of LTE communications capabilities, including video streams. The internal memory provides ample storage for custom scripts, software applications and a wide variety of protocols. In addition to its Ethernet and RS-232 ports, SmartStart™ has built-in digital I/O connectivity. Competing routers in the same price range generally provide only Ethernet or RS-232. StartSmart™ provides all three.
The router supports VPN tunnel creation using various protocols to ensure safe communications. The router provides diagnostic functions which include automatic monitoring of the wireless and wired connections, automatic restart in case of connection losses, and a hardware watchdog that monitors the router status.
SmartStart is easy to install using SmartWorx HUB™, a full featured configuration and monitoring tool. Our VPN configuration tool, SmartCluster™, makes it easy to configure multiple routers via the same VPN tunnel.
• For Industrial IoT and consumer focused high speed data applications
• Ethernet, serial RS-232 and I/O for connecting a wide array of field assets with DIN rail or wall mounting
• Low power consumption for solar and battery power applications
• Exceptionally resilient wireless and wired connection
• Enhanced memory to host custom software applications and a wide variety of protocols
• Easy deployment, mass maintenance and troubleshooting with SmartWorx Remote management and monitoring tools
• Loaded with advanced features to secure your data.

Product Details

• Powerful processor enough to handle the full range of LTE communication
• 1x Ethernet 100 Mbps – RJ45, 10/100 Mbps, 1.5kV RMS
• 1x RS232 port – DB9 Female
• Two SIM card holders on the rear side of the router (given DIN holder on back side) – 2 Mini SIMs (2FF)
• 1x I/O – Integrated in 4 way Molex mini connector – Configurable I/O pin on power connector
• 1x Digital Input : 0 to 36 VDC, logic 0: 0 to 0,7 V, logic 1: 1,6 V to 36 V
• 1x Digital Open Collector Output > sinking 200 mA/ 36 V DC
• Input voltage range is from 9 Vdc to 36 Vdc (4-Way Molex moni-fit connector)
• Power consumption with WiFi – Average / Peak / Sleep Mode – 2,7 / 5.5 W / 40 mW
• Power consumption without WiFi – Idle / Average / Peak / Sleep Mode – 2,1 / 4.8 W / 40 mW
• Current with WiFi / without WiFi – 0.65 A Max / 0.55 A Max
• Temperature range with WiFi – Operating / Storage – -25 to +55 °C / -40 to +85 °C
• Temperature range without WiFi – Operating / Storage – -40 to +75 °C / -40 to +85 °C
• Humidity – Operating / Storage (non condensing) – 0 to 95 % / 0 to 95 %
• Cold Start – -40 °C
• Operating Altitude – 2000 m / 70 kPa
• Enclosure Rating – IP30
• LED Indicators – PWR, DAT, WAN, ETH
• 2x ANT connectors, WiFi antenna – *optional – R-SMA connector
• Enclosure Dimensions – 87x30x127mm (150mm including wall month sides)
• Weight – 187g
• Wi-Fi 802.11 b/g/n – *optional (AP/STA) 55+ clients supported (-25 to +55 °C)
• Support of IPv6, Easy firmware update

SOLUTIONS

NEWSLETTER