• Bus Interface Specification 10/100BASE-T • Memory – SDRAM 8MB – Flash 4MB • Enclosure STAINLESS STEEL • Installation Method Panel Mountable or DIN Rail • LED Indicators 100MB Ethernet, Duplex, Ethernet Link/Activity, and Status • Dimensions – 3.6″ x 0.8″ x 2.8″ – 41.4 x 20.3 x 71.1 mm • Product Weight – 7.8 oz – 221.13 g |
• Device Requirements 200mA @5 VDC • Device Consumption 2.1 Watts • External Power Supply • Input 90 to 132 VAC @ 60Hz • Output 420mA @ 5 VDC • ESD Surge Protection Provides minimum of 15KV protection for all serial lines. All Ethernet components are rated to 1.5KV magnetic surge protection. |
• Air temperature – System On -37 to 74° C – System Off -40 to 85° C • Operating Humidity (non-condensing) 5% to 95% • Altitude 0 to 10,000 Feet 3,048 m • Heat Output 7.2 BTU/Hr • MTBF (Mean Time Between Failures) 48.4 Years |
• Connector Type DB9M • Number of Ports 1 • Software Selectable Interfaces – RS-232 – RS-422 – RS-485 • Baud Rate 300 to 230.4Kbps – Receive Buffer 1024bytes – Transmit Buffer 256bytes • Device Driver Data Control – Data Bits 7 or 8 – Parity odd, even, or none – Stop Bits1 or 2 – Flow Control Hardware, Software, or None |
• Network Protocols ARP, BOOTP, DHCP/RARP/Ping, HTTP, ICMP, RFC 1006 (ISO over TCP), SNMP (MIB-II), TCP/IP & UDP socket services, Telnet, TFTP, and supports IP multicast data transmission • Connector Type RJ45F Auto MDI/MDI-X • Number of Ports 1 |
• SNMP Support MONITORING ONLY. • Other Event notification, Lowest latency, NS-Link COM/TTY port redirector, PortVision remote management, and Watchdog reset • Manufacturer’s Warranty 5 Years |
• Emissions Canadian EMC requirements • Immunity European Standard EN55024 • Safety |