Key Features:

TOC 6556251
EAN 4018242336838
EEC A++, A+, A
Luminous efficacy 111 lm/W
Lamps/luminaire luminous flux 2000 lm
Connected load (W) 18,00 W
Colour temperature 4000 K
Degree of protection IP66
Colour anthracite, similar to DB 703
Weight 12.5 kg

Product Details

Luminaire type
Post-top luminaire with flat cover.

Traffic roads, Main roads, Collection roads, Residential roads, Low-traffic roads, Paths in parks and green areas, Residential facilities, Stairs, Access areas, Crossroads, Traffic roundabouts, Car parks.

Mounting methods
For post-top mounting to Post spigot Ø 76 mm.. Simple installation and maintenance via tool-free opening of luminaire. Reduction piece of stainless steel for post spigot Ø 60 mm available as accessory. Mast mounting via two stainless steel fixing screws in accordance with EN 60598-2-3. Also suitable for mounting to masts with spigot Ø 60 mm via reduction pieces to be ordered separately.

Optical system
Optical system of metallised 3D freeform plastic reflector, semi-specular. With asymmetrical wide light intensity distribution. Further beam characteristics are available for flexible adaptation to customer-specific lighting tasks.

LED system
LED system consists of two standardised LED modules, Zhaga-compliant, mounted to aluminium supports. LED modules can be separately replaced due to patented clamp system. Luminaire luminous flux 2000 lm, connected load 18,00 W, luminous efficiency of luminaire 111 lm/W. Light colour neutral white, correlated colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 70. Mean rated service life LCLO(tq 25 °C) = 100,000 h.

Luminaire body
Luminaire body of die-cast aluminium. Colour of luminaire body anthracite, similar to DB 703 with metal effect, highly weather resistant, powder-coated. Sea weather-suitable coating on request. Cover of heat-treated non-laminated safety glass. Cover sealed in cast frame, can be hinged down without tools. Transmission value of cover > 98%, reflection-reduced.

Electrical connection
Electrical connection to 5-pole terminal to 2.5 mm². Accessible without tools. M20 cable gland as strain relief. For 6 mm to 12 mm cable diameters.

Electrical version
With electronic transformer, digitally dimmable (DALI). Surge voltage resistance 4 kV. Electrical block contains all electric components, can be replaced without tools. With automatic power disconnection when luminaire is opened. Configurable ballast with luminous flux stabilising (CLO). Connected load at the end of service life: 19,00 W. The luminaire complies with fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol.

Planning information:
The luminaire is compliant to the requirements of EN 60598 and is designed for the effects of wind compliant to EN 1991 (Eurocode) with basic wind velocity of up to 30m/s (corresponding to wind zone 4 in Germany) in terrain category 1. A snow load (up to 1kN/m²) and icing (up to 2 cm) at a mounting height in accordance with the mounting instructions are taken into account. Not considered are exposed locations (e.g. bridges, installation on buildings or directly adjacent to railway tracks). Impact loads are not considered.