TSPC Series

Input voltage

– nominal ranges    100 – 120 / 220 – 240 VACby selection switch

– effective ranges    85 – 132 / 187 – 264 VAC

– output power derating at input <100 VAC 3.3 %/V

Input voltage frequency    47 – 63 Hz

Harmonic limits     EN 61000-3-2

Holdup time    10 ms min.

Inrush current      70 A

Recommended circuit breaker, characteristic C  or fuse, slow blow type

– TSP 080/120  6.0 – 16.0 A

– TSP 240  10.0 – 16.0 A

– TSP 480  16.0 – 25.0 A

Efficiency      85 – 93 %

Output voltage adj. range

– 12 VDC models:  12 – 14 VDC

– output power derating above 12 VDC : 10 %/V

– 24 VDC models:  24 – 28 VDC

– output power derating above 24 VDC : 5 %/V

– 48 VDC models:  48 – 56 VDC

– output power derating above 48 VDC : 2.5 %/V

Boost output current

– 120 %(at 24 VDC output voltage)

– continuouse at <+50°C ambient temperature

– power derating above 50°C ambient 2 %/°C

– power derating at input <115 VAC 1.3 %/V

– power derating at input <220 VAC 0.6 %/V (at upper input voltage range)

Regulation

– Input variation    1 % max.

– Load variation (0–100 %)    1 % max.

Ripple and Noise (20MHz bandwidth)    100 mVp-p typ. (200 mVp-p max.)

Overload protection    120 – 140 % of Iout nom., constant current

Short circuit current    90 % of Iout nom. (typ.), foldback

Output overvoltage protection    45 V

Over temperature protection    switch off at overtemperature, automatic restart

Power back immunity

– 12 VDC models:  16 V (18 V for 1 sec.)

– 24 VDC models:  35 V (40 V for 1 sec.)

– 48 VDC models:  63 V (65 V for 1 sec.)

Power OK signal

– trigger threshold  12 VDC models:   10.0 – 11.5 V

– 24 VDC models:   21.0 – 22.5 V

– 48 VDC models:   42.0 – 45.0 V

– output signal  12 VDC models:  open collector 20 mA max.

– 24 VDC models:  open collector 10 mA max.

– 48 VDC models:  open collector 5 mA max.

– Max. capacitive load    unlimited

Temperature range
– Operating    –25°C to +70°C max.

– output current derating above 60°C ambient  2.5 %/°C

Humidity (non-condensing)    95 % rel. H max.

Temperature coefficient    0.02 %/K

Isolation       according to IEC/EN 60950-1, UL 60950-1, UL 508

Safety standards

– Information technology equipment  IEC/EN 60950-1, UL 60950-1, CSA 22.2 No 60950-1-07

– Industrial control equipment    UL 508, CSA- C22.2 No.107

– Electrical equipment for machines EN 60204-1

– Electronic equipment for power installation EN 50178

– Safety of transformers    EN 61558-2-6, EN 61558-2-16

– Control equipment for hazardous location  EN60 079-15II3G EX nA IIC T4

Safety approvals and certifications

– CB scheme (IEC 60950-1)

– UL approvals     UL 60950-1, CSA 22.2 No. 60950-1-07

UL 508C listed File: e210002

– ATEX (for IP 54 enclosure)    certificate no. EPS 10 ATEX 1 269 X

– BG cert. (EN 61558-2-6/16, EN60950-1)

Electromagnetic compatibility (EMC), Emissions    EN 61000-6-3, EN 61204-3

– Conducted RI suppression on input EN 55011 class B, EN 55022 class B,

– Radiated RI suppression    EN 55011 class B, EN 55022 class B,

Electromagnetic compatibility (EMC), Immunity    EN 61000-6-2, EN 61204-3

– Electrostatic discharge (ESD)    IEC/EN 61000-4-2  4 kV / 8 kV  criteria B

– Radiated RF field immunity    IEC/EN 61000-4-3  10 V / m  criteria A

– Electrical fast transient / burst immunity IEC/EN 61000-4-4  2 kV  criteria B

– Surge immunity    IEC/EN 61000-4-5  1 kV / 2 kV  criteria B

– Immunity to conducted RF disturbances IEC/EN 61000-4-6  10 V  criteria A

– Power frequency field immunity    IEC/EN 61000-4-8  30 A / m  criteria A

– Mains voltage dips and interruptions IEC/EN 61000-4-11  criteria B/C

Environment

– Vibration acc. IEC 68-2-6;     3 axis, sine sweep, 10 – 55 Hz, 1 g, 1 oct/min

– Shock acc. IEC 60068-2-27    3 axis, 15 g half sine, 11 ms