Standards | – IEEE802.3af / 802.3at for Power-over-Ethernet – IEEE802.3 for 10BASE-T – IEEE802.3u for 100BASE-T(X) and 100BASE-FX – IEEE802.3ab for 1000BASE-T(X) – IEEE802.3z for 1000BASE-X – IEEE802.3x for Flow Control – IEEE802.1D-2004 for Spanning Tree Protocol – IEEE802.1w for Rapid STP – IEEE802.1Q for VLAN Tagging – IEEE802.1p for Class of Service – IEEE8021X for Authentication – IEEE802.3ad for Port Trunk with LACP |
Protocols | IPv4, IPv6, IGMPv1/v2/v3, IGMP Snooping, GARP,GMRP, GVRP, SNMPv1/v2c/v3, SNMP Inform, ICMP, Telnet, SSH, DHCP Server/Relay/Client, DHCP Option 66/67/82, BootP, RARP, TFTP, NTP Server/Client, SNTP, SMTP, SMTP (Gmail), RMON, HTTP, HTTPS, Syslog, MRP (Client), LLDP, IEEE 1588 PTP V1/V2, IEEE 1588 Hardware Transparent Clock, 802.1x, EAP, RADIUS, TACACS+, Mirror port, QoS, ACL, Serial Console, U-Ring, STP, RSTP, MSTP, Redundancy Compatible Ring, Profinet, Ethernet/IP, Modbus/TCP |
MIB | MIB II, IF-MIB, SNMPv2 MIB, BRIDGE-MIB, RMON MIB Group 1,2,3,9, RFC RFC 1157, RFC 1213, RFC 1215, RFC 1493, RFC 1643, RFC 1757, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC 2571, RFC 2742, RFC 2819, RFC 2863, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, |
Flow Control | IEEE802.3x for Flow Control, back pressure flow control |
Priority Queues | 8 |
Max. Number of Available VLANs | 256 |
VLAN ID Range | VID 1 to 4094 |
Static IGMP Groups | 256 |
Dynamic IGMP Groups | 256 |
MAC Table Size | 16K |
Packet Buffer Size | 12 Mbit |
RJ45 Ports | 10/100/1000BASE-T(X) or 10/100 BASE-T(X) auto negotiation speed |
Fiber Ports | 100BASE-FX / 1000BASE-X SFP slot |
LED Indicators | PWR1, PWR2, Alarm, Run, Ring, Ring Master, RJ-45 Link/Speed, SFP Link, PoE |
Console | RS232 (RJ45 connector) |
Relay Output | 2 relay outputs with current carrying capacity of 2A @30VDC |
DIP Switches | Ring Control |
Button | Reset Button |
Input Voltage | 9-48 VDC or 18~30VAC for Non-PoE models 45-57 VDC for 802.3af mode 51-57 VDC for 802.3at mode |
Input Current | Max. 1.5A @ 18VAC Max. 2.0A @ 9VDC (without PD) Max. 3.2A @ 45VDC (Support up to 8 ports at 15.4W per PoE port) Max. 5.5A @ 51VDC (Support up to 8 ports at 30W per PoE port) |
Connector | Removable 5-pin Terminal Block for power input |
Reverse Polarity Protection | Present (DC only) |
Housing | IP30 protection, metal housing |
Dimension | 60.3mm x 137.9mm x 164mm (W x D x H) |
Weight | approx 1.2 kg (Max.) |
Installation | DIN-Rail, Wall Mount (Optional Kit) |
Operating Temperature | -20°C~70°C (-4°F~158°F) |
Storage Temperature | -40°C~85°C (-40°F~185°F) |
Ambient Relative Humidity | 5%~95% non-condensing |
Safety | UL60950-1 2nd Ed. /CSA C22.2 No.60950-1-07 2nd Ed. / EN60950-1 / CB | |||
EMC | FCC Part 15, Subpart B, Class A / EN 61000-6-4:2007+A1:2011 / EN 61000-6-2:2005 | |||
Test | Item | Value | Level | |
IEC 61000-4-2 | ESD | Contact Discharge | ±6KV | 3 |
Air Discharge | ±8KV | 3 | ||
IEC 61000-4-3 | RS | Radiated(Enclosure) | 10 (V/m) | 3 |
IEC 61000-4-4 | EFT | AC Power Port | ±2.0 KV | 3 |
DC Power Port | ±2.0 KV | 3 | ||
Signal Port | ±1.0 KV | 3 | ||
IEC 61000-4-5 | Surge | AC Power Port | Line-to-Line ±1.0KV | 3 |
AC Power Port | Line-to-Earth ±2.0KV | 3 | ||
DC Power Port | Line-to-Line ±1.0KV | 3 | ||
DC Power Port | Line-to-Earth ±2.0KV | 3 | ||
Signal Port | Line-to-Earth ±1.0KV | 3 | ||
IEC 61000-4-6 | CS | Conducted(Enclosure) | 10 Vrms | 3 |
IEC 61000-4-8 | PFMF | (Enclosure) | 30(A/m) | 4 |
IEC 61000-4-11 | DIP | AC Power Port | – | – |
Shock | IEC 60068-2-27 | |||
Drop | IEC 60068-2-32 | |||
Vibration | IEC 60068-2-64 | |||
Traffic Control | NEMA TS-2 | |||
RoHS | Yes | |||
MTBF | 11 years | |||
Warranty | 5 years |