Isolated Timing Repeater(HV MOSFET)
• Extend the distance of an IRIG-B or Pulse signal
• Provide isolation between A & B Protection Systems or between IEDs
• Converts a TTL signal from copper to fiber / fiber to copper
• Converts a TTL signal to a digital High Voltage MOSFET signal
• Reduces wiring to panels of equipment
| Design |
|---|
| UL94-V0 polycarbonate flame retardant din rail mount case with IP40 (Ingress Protection rating). |
| Dimensions |
|---|
| (W) 55 mm x (D) 60 mm x (H) 90 mm |
| Copper |
|---|
| 5 V, 2 mA max TTL compatible (2 Pin screw terminal) |
| Fiber |
|---|
| ST Fiber (62.5/125 um) multi-mode Sensitivity -34.4 dBm |
| HV MOSFET: |
|---|
| 300 Vdc, 1A (2 Pin screw terminal) |
| Power supply options |
|---|
| Low(12-36Vdc) Med(20-72Vdc) High(90-300Vdc) |
| Power Drain |
|---|
| 1.5 W max |
| Operating temperature |
|---|
| -10 to +65°C |
| Humidity |
|---|
| 10% to 95% non-condensing |
| Input to copper/fiber output |
|---|
| 85 ±10 ns |
| Input to HV MOSFET Output |
|---|
| 60 μs (Typical) |
| Power to I/O |
|---|
| 2 kV |
| Input to Earth |
|---|
| 3.5 kV (min) |
| Output to Earth |
|---|
| 3.5 kV (min) |
