Industrial Unmanaged PoE Ethernet Switch
• 8-Port 10/100/1000Mbps Gigabit Ethernet ports
• Supports P.S.E. based on IEEE802.3af/IEEE 802.3at
• Supports PoE Power up to 30 Watts for each PoE port
• Supports auto-negotiation and auto-MDI/MDI-X
• Supports store and forward transmission
• Supports flow control
• IP-30 metal case
• DIN-Rail and wall mounting (Optional)
| Technology | |
| Standards | IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X), IEEE 802.3at/af for Power over Ethernet Technology IEEE 802.3x for Flow Control IEEE 802.3z for 1000BaseX |
| MAC Address Table | 8K |
| Switching Latency | 2.3us |
| Processing Type | Store and Forward |
| Flow Control | IEEE802.3x full duplex, back pressure flow control |
| Interface | |
| RJ45 Ports | 10/100/1000baseT(X),Auto MDI/MDI-X(Support Mode A) |
| Fiber Ports | 1000Base SFP slot |
| LED Indicators | LAN(Steady green-Link up/Blinking-data transmitting & receiving), PoE(Yellow), PWR1(Green), PWR2(Green), Fault(Red) |
| Power Requirements | |
| Dual Input | 48 ~ 57 VDC (IEEE802.3af :48VDC input / IEEE802.3at :50~57VDC input) |
| Dual Inputs Current | Max. 3.1 A @ 55VDC (supports up to 4 ports at 30 W per PoE port) |
| Overload Current Protection | Present |
| Connection | Lockable 7-pin terminal blocks for power input |
| Reverse Polarity Protection | Present |
| Consumption | 148.5W (with PoE full function) |
| Physical Characteristics | |
| Housing | IP30 protection (>2.5mm objects, IEC60529), metal case (AL6063T5) |
| Dimensions (W x H x D) | 53.4mm x 145.7mm x 119.9mm ( 2.10 x 5.74 x 4.72 in ) |
| Weight | Approx 1000g |
| Installation | DIN-Rail mount kit, wall mount kit (optional) |
| Environmental Limits | |
| Operating Temperature | -10°C ~ 70°C (14°F ~ 158°F) |
| Storage Temperature | -40°C ~ 85°C (-40°F ~ 185°F) |
| Ambient Relative Humidity | 5% to 95% (non-condensing) |
| Notes: For UL policy the maximum operating temperature is 60°C, and the human body can tolerate maximum temperature is 70°C. | |
| Environmental Limits | |
| Safety | UL 60950-1 |
| EMI | FCC Part 15 class A, CISPR(EN55032) class A |
| EMC | EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT),level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 2 EN61000-4-8 (PFMF) EN61000-4-11 (Dips) |
| Shock | MIL-STD-810F Method 516.5 |
| Freefall | MIL-STD-810F Method 516.5 |
| Vibration | MIL-STD-810F Method 514.5 C-1 & C-2 |
| MTBF | |
| Warranty | 5 years |
| EMI Immunity Type Tests | ||||
| Test | Description | Test Levels | Severity Levels | |
| FCC part 15 | – | Subpart B | – | class A |
| EN55032 | – | 2012+AC:2013 | – | class A |
| EMS Tests | ||||
| Test | Description | Test Levels | Severity Levels | |
| IEC61000-4-2 |
ESD |
Contact discharge | 6 KV, Criterion B | level 3 |
| Air discharge | 8 KV, , Criterion B | level 3 | ||
| IEC61000-4-3 | RS | Enclosure ports | 10 V/m (80 – 1000 MHz),
Criterion A |
level 3 |
| IEC61000-4-4 | EFT | Power Line | 2 KV, Criterion B | level 3 |
| IEC61000-4-5 | Surge | Signal Port | 2 KV, Criterion B | level 3 |
| Power Line | 2 KV, Criterion B | level 3 | ||
| IEC61000-4-6 | CS | Signal Port | 3 V (0.15 – 80 MHz), Criterion A
10 V (0.15 – 80 MHz), Criterion A |
level 2 |
| Power Line | level 2 | |||
| Safety Tests | ||||
| Test | Description | Rating | Severity Levels | |
| UL60950-1 | – | 2nd Edition, 2007-03-27 | 48-57 V DC, 3.1A max | – |
| CSA C22.2 No.60950-1-07 | – | 2nd Edition, 2007-03 | 48-57 V DC, 3.1A max | – |
| CB | – | IEC 60950-1:2005 second version | 48-57 V DC, 3.1A max | – |
| Environmental Type Tests | ||||
| Test | Description | Test Levels | Severity Levels | |
| MIL-STD-810F | Shock | Impact acceleration & Pluse duration | 40g @ 11ms | – |
| MIL-STD-810F | Freefall | 8 corners, 12 edges, 6 faces | 122 cm | – |
| MIL-STD-810F | Vibration | Packaged Random waveform | x: 2.4 Grms y: 1.28 Grms z: 3.85 Grms |
– |
| Operating Random waveform | x: 0.740 Grms y: 0.204 Grms z: 1.04 Grms |
– | ||
