RX1100 is a utility grade advanced cyber security appliance with integrated router, firewall, VPN and Intrusion Detection functionality (IDS). Ruggedcom RX1100 can be used to establish an electronic security perimeter around critical cyber assets found in control and automation systems, in order to prevent the disruption of operations by accidental or malicious acts.
• Immunity to EMI and high-voltage electrical transients
• Meets IEEE 1613 (electric utility substations)
-Exceeds IEC 61850-3 (electric utility substations)
• –40°C to +85°C operating temperature
• Ethernet options (up to 4 ports): 10/100BaseTX, 100BaseFX
• Serial ports (up to 8 ports):
– Fully compliant EIA/TIA RS485, RS422,
– RS232 serial ports (software selectable) – RJ45 connectors
• Web-based, SSH, CLI management interfaces
• SNMP v2/v3
Rugged Rated for Reliability in Harsh Environments
| • Immunity to EMI and high-voltage electrical transients • Meets IEEE 1613 (electric utility substations) -Exceeds IEC 61850-3 (electric utility substations) -Exceeds IEC 61800-3 (variable-speed drive systems) -Exceeds IEC 61000-6-2 (generic industrial environment) -Exceeds NEMA TS-2 (traffic control equipment) • –40°C to +85°C operating temperature (no fans) • Failsafe output relay: for critical failure or error alarming • 18 AWG galvanized steel enclosure and 19″ rack-mount adapter |
Physical Ports
| • Ethernet options (up to 4 ports): 10/100BaseTX, 100BaseFX • Cellular modem (GSM-EDGE) • WAN port options (up to 8 ports): – T1/E1 (channelized/unchannelized) – supports 2 • Mbps G.703 with 120-ohm balanced connections : – PPPoE/Bridged Ethernet via ADSL – T3 DS3 – 56 Kbps DDS • Serial ports (up to 8 ports): – Fully compliant EIA/TIA RS485, RS422, – RS232 serial ports (software selectable) – RJ45 connectors – Raw socket mode support allows conversion of any serial protocol • Embedded modem port • Precision time protocol (PTP): accurate time synchronization using NTP, IRIG-B, and/or IEEE1588 |
Protocols
| • WAN – Frame relay RFC 1490 or RFC 1294 – PPP RFC 1661, 1332, 1321, 1334, PAP, CHAP Authentication – PPPoE over DSL – GOOSE messaging Support • IP – Routing – VRRP, OSPF, RIP, DHCP agent (Option 82 capable) – Traffic prioritization, NTP server, IP multicast Routing |
Security Appliance Functions
| • Integrated router/firewall/VPN • Stateful firewall with NAT • Full IPSec virtual private networking • VPN with 3DES, AES128, AES256 support • Intrusion detection services (IDS) • Substation Automation Software RUGGEDCOM CROSSBOW for NERC CIP cybersecurity compliance • RADIUS centralized password management |
Frame Relay Support
| • ISO and ITU compliant, network certified • ANSI T1.617 Annex D, Q.933 or LMI local signaling |
Management Tools
| • Web-based, SSH, CLI management interfaces • SNMP v2/v3 • Remote syslog • Rich set of diagnostics with logging and alarms • Loopback diagnostic tests • Raw and interpreted real-time line traces |
Universal Power Supply Options
| • Fully integrated power supplies (no external adapters) • Input voltage range of 9–59 VDC, 88–300 VDC, and 85–264 VAC for worldwide operability • Optional dual-redundant, parallel load-sharing power supplies for increased network availability • Can be powered from different sources for ultimate redundancy • CSA/UL 60950 safety approved to +85°C |
