Ethernet | Modular RJ45 |
10/100 BaseT with autonegotiation | |
WiFi (optional) | 2.4GHz (802.11 b/g) |
WPA2 Security | |
Integrated Antenna | |
Power | Off-the-shelf 5V/2A wall adapter |
5.5 mm barrel connector |
CPU | NXP Kinetis K64MCU-120MHz Cortex M4 |
Integrated 1Mb Flash and 256Kb SRAM | |
Pre-programmed MCU for higher volume | |
Memory | SPI NOR Flash – up to 2 MB |
Packaging | Polycarbonate Enclosure |
Dimensions | 96 x 96 x 25 mm |
Cooling | Convection Cooled |
LED-1 | Power Indicator |
LED-2 | LoRa Link Indicator |
LED-3 | WiFi Link / Traffic Indicator |
OS | FreeRTOS |
Configuration and Calibration | NVM storage management |
Gateway Image Management | Factory image provisioning |
Active and Passive image management | |
Firmware update over ETH/WiFi | |
Image corruption recovery built in | |
Networking | DHCPv4 client |
TFTP server | |
HTTP server | |
Firewall and Access Lists |
ISM NA915 Band | 902 – 928 MHz |
ISM EU868 Band | 863 – 870 MHz |
ISM AU915 Band | 915 – 928 MHz |
ISM AS923 Band | 920 – 928 MHz |
Tx Power | Adjustable to 27 dBm |
Rx Sensitivity | -139.5 dBm (SF12, 293 bits/sec) |
Rx Noise Figure | 3.0 dB |
Rx Linearity | -10 dBm |
Rx Dynamic Range | 60 dB |
Safety | UL 60950-1 |
EMC | FCC Part 15: 247, 109, 209, 107 |
FCC Colocation (WiFi version only) | |
ETSI 300 489-1, 489-3, 489-17(EU only) | |
ETSI 300 220-1, 220-2 (EU only) | |
ETSI 300.328 (WiFi version only) | |
Environmental | Operating Temperature: 0°C to +40°C |
Storage Temperature: -20°C to +70°C | |
Humidity: 5% to 95% Non-Condensing |
Tools | Access Control List managment |
WiFi Parameter Configuration | |
Firmware update and reset |