XB-469

Key Features:

TOC 6445540
EAN 4018242323234
EEC A++, A+, A
Luminous efficacy 146 lm/W
Lamps/luminaire luminous flux 8200 lm
Connected load (W) 56,00 W
Colour temperature 4000 K
Degree of protection IP66
Colour metallic grey, similar to RAL 9006
Weight 18.8 kg

Product Details

Luminaire type
LED-Floodlight for accent lighting and planar illumination.

Applications
Container areas, Large building sites, Storage locations, Terminals, Parking lots, Power stations, Sports centres, Accent lighting, Accent lighting.

Mounting methods
Mounting bracket of galvanised steel. For fixing the luminaire to single or multiple-configuration masts, this application must be supplemented with separately ordered accessories (cross-arms).

Optical system
With a specular optic of photometrically high-efficiency aluminium for maximum light output ratio and low glare. With asymmetrical wide light intensity distribution. Maximum light intensity in beam angle 55 °.

LED system
Luminaire luminous flux 8200 lm, connected load 56,00 W, luminous efficiency of luminaire 146 lm/W. Light colour neutral white, correlated colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 70. Mean rated service life LCLO(tq 25 °C) = 50,000 h.

Luminaire body
Luminaire body and cover support of die-cast aluminium. Cover of flat non-laminated safety glass fixed in frame. Sealings of sulphur-free, synthetic EPDM rubber. Colour metallic grey, similar to RAL 9006, highly weather resistant, powder-coated. Further colour variants possible from RAL or DB colour codes. The spatial separation of connection compartment and optical system achieves optimised luminaire thermal management.

Electrical connection
Gear tray can be removed and hooked in without tools.

Electrical version
With electronic transformer, switchable. Connection compartment opened without tools via lever catches. Gear tray removed and replaced without tools. Surge voltage resistance 4 kV. The connection compartment is prepared for the subsequent installation of lightmanagementsystems. Configurable ballast with luminous flux stabilising (CLO). Connected load at the end of service life: 67,00 W. The luminaire complies with fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol.

The luminaire is compliant to the requirements of EN 60598 and is designed for the effects of wind compliant to EN 1991 (Eurocode) with basic wind velocity of up to 30m/s (corresponding to wind zone 4 in Germany) in terrain category 1. A snow load (up to 1kN/m²) and icing (up to 2 cm) at a mounting height in accordance with the mounting instructions are taken into account. Not considered are exposed locations (e.g. bridges, installation on buildings or directly adjacent to railway tracks). Impact loads are not considered.

SOLUTIONS