Industrial Modbus LTE 4G cellular Router
• High-performance industrial-grade wireless module / 32-bit communication processor
• Metal shell, protection grade IP30. Metal shell, and protection grade IP30, Wide power
input range 5~36V
• WDT Watchdog design
• Adopt a complete anti-drop mechanism to ensure that the data terminal is
always online
• Built-in 1.5KV electromagnetic isolation protection for Ethernet interface
RS232/RS485 interface power and data isolation, in line with CSA,
UL and IEC standards
• SIM/UIM card interface built-in 15KV ESD protection
• Built-in reverse phase protection and over-voltage protection for power interface
• Standard RS232 or RS485/RS422 (Optional), Ethernet and WIFI Interface
• Provide standard wired WAN port (support standard PPPOE protocol) ,
Plug and Play Multiple working mode options
• Configuration and maintenance interface
• Support DIN rail
• Support local and remote WEB mode or CLI mode
• Multiple WAN connection methods, include static IP, DHCP, PPPOE,
3G/UMTS/4G/LTE, DHCP-4G/5G, 3G/4G/5G and wired WAN dual-link
backup（optional）
• VPN client PPTP/L2TP/IPSEC（only available in VPN version ） VPN sever
PPTP/L2TP/IPSEC（only available in VPN version） Remote management
SYSLOG/SNMP/TELNET/SSH/HTTPS
• Support local upgrade and remote upgrade， Import and export configuration files
NTP / Built in RTC
• MAC address clone , WIFI support 802.11b/g/n/ac, support WIFI AP /AP Client/bridge
mode etc. (optional）
• WIFI support WEP/WPA/WPA2 encryption
• Support multiple online and offline trigger modes Support APN/VPDN ,DHCP server
/ DHCP client/DHCP binding MAC/DDNS/NAT/DMZ/QOS Support TCP/IP/UDP/FTP
（Optional）/HTTP and other network protocols
• Support SPI firewall, access control, URL filter, IPV6/IPV4, 5G LAN, lock frequency,
lock resident, EOIP, bridge mode, VxLAN, virtual IP, GRETAP, etc, traffic statistics,
real-time display of data transmission rate
| Cellular Specification | |
| Module | Industrial grade wireless module |
|
Frequency |
Support for FDD LTE: Band 1/3, Band 2/4/5/13/17/25 (Optional)
Support CDMA 1XRTT/EVDO 800/1900MHz Support the whole network (Optional) : TDD-LTE, FDD-LTE, EVDO, WCDMA, TD-SCDMA, CDMA1X, GPRS/EDGE |
|
Bandwidth |
FDD LTE (Downlink 100Mbps, Uplink 50Mbps) , TDD LTE (Downlink 61Mbps, Uplink 18Mbps)
CDMA2000 1X EVDO Rev A (Downlink 3.1Mbps, Uplink 1.8Mbps) , WCDMA (Downlink 42Mbps, Uplink 5.76Mbps) , TD-SCDMA (Downlink 4.2Mbps, Uplink 2.2Mbps) |
| Power | < 23dBm |
| Sensitivity | <- 93.3dBm |
| WIFI Specification | |
| Frequency | Support IEEE802.11b/g/n |
|
Bandwidth |
IEEE802.11b/g：54Mbps , IEEE802.11n：150Mbps |
| Security | Support WEP, WPA, WPA2 and other encryption methods, WPS (Optional) |
| Power | 20dBm（11n），24dBm（11g），26dBm（11b） |
| Sensitive | <-72dBm @ 54Mbps |
| Hardware System | |
| CPU | Industrial-grade 32-bit communication processor |
| FLASH | 16MB, Extensible to 32MB |
| DDR3 | 128MB |
| Interfaces | |
|
WAN |
1 x 10/100M Ethernet （RJ45） , Auto MDI/MDIX, Built-in 1.5KV electromagnetic isolation protection |
|
LAN |
4 x 10/100M Ethernet （RJ45）, Auto MDI/MDIX, Built-in 1.5KV electromagnetic isolation protection |
|
Serial |
1 x RS232(RS422/RS485), Built-in 1.5KV electromagnetic isolation protection Data bit：5, 6, 7, 8
Stop bit：1, 1.5(Optional), 2 Calibration: null, even, odd, SPACE(Optional) and MARK (Optional) Baud rate：2400~115200bits/s |
| Indicators | “PWR”, “SYS”, “WIFI”, “SIM”, “Online”, “Signal Strength” |
|
I/O Port |
6-pin 3.5mm wiring terminal, 2 inputs, 1 output, 1 relay; Controlled by Modbus protocol Input high level: 5 to 30 VDC
Input low level: 0 to 3 VDC Load current: 50mA @ 30VDC Relay load 1A 250V AC/ 30V DC |
|
Antenna |
Cellular：2 standard SMA female antenna interfaces, characteristic impedance 50 ohms WIFI：1 standard SMA male antenna interfaces, characteristic impedance 50 ohms
GPS: 1 calibrated SMA male antenna interface, characteristic impedance 50 ohms |
|
SIM/UIM |
Standard drawer type user card interface , Support 1.8V/3V SIM/UIM card, built-in 15KV ESD protection
|
| Power | Terminal power socket |
| Reset button | 2 bins terminal power socket, built-in power reverse protection and overvoltage protection |
| Power Supply | |
| Standard | DC 12V/1.5A |
| Range | DC 5 ~36V |
| Consumption | <500mA (12V) |
| Physical Properties | |
| Shell | Metal shell, protection grade IP68 |
|
Size |
134.8 x 115.7 x 45mm
(Does not include antenna and mounting parts) |
| Weight | 520g |
| Others | |
| Operating Temperature | -35~+75ºC（-31~+167℉） |
| Storage Temperature | -40~+85ºC（-40~+185℉） |
| Relative Humidity | 95% (No condensation) |
