A5

Key Features:

Unparalled Access

 

A5 Point-to-Multipoint Access Point
4.9–6.4 GHz*

The Mimosa A5 access point delivers cutting-edge multipoint technology for service providers to affordably deliver the industry’s first scalable, gigabit, wireless broadband network.

Product Details

Applications

 

Suburban and Urban wireless broadband
Municipal Licensed Public Safety multipoint
(4.9 GHz)

Performance

 

Fiber Speed Access Capable of delivering the speed business users and consumers need at a fraction of the cost of delivering fiber-to-the-premise.
Network-Wide Cloud Control Mimosa Cloud makes deployment a breeze, interacting with devices network-wide to proactively assist the A5 to optimize network and subscriber experience for the best performance and capacity management.
Working Above the Noise Advanced auto-gain control techniques automatically squelch out underlying interference with only 10 dB of operating margin required to deliver incredible client performance.
Compact and Fast With up to 1.0 Gbps of total capacity, the A5 is the industry’s fastest multipoint solution in a tiny form factor, making suburban rooftop or urban installation a fast, easy and discrete solution.
Network Scalability Perfected Unique integrated, high-precision GPS Sync technology allows every deployed device to be collaboratively synchronized across the network, allowing easy channel reuse to save spectrumnetwork-wide.

Technical Specifications

 

Performance
Max Throughput: Up to 1.0 Gbps IP (1.7 Gbps PHY)
Client Capacity: 100 clients (WiFi Interop); 44 clients (SRS)
Wireless Protocols: WiFi Interop; Spectrum Reuse Synchronization (SRS)

 

Radio
MIMO & Modulation: 4×4:4 MIMO OFDM up to 256-QAM
Bandwidth**: 20/40/80 MHz channels tunable in 5 MHz increments for GPS Sync;
Tunable to standard WiFi channels for WiFi Interop
Frequency Range: 4900–6400 MHz* restricted by country of operation
(US/FCC 5600–5650 support)
Max Output Power: 30 dBm
Sensitivity ( MCS 0 ):  -87 dBm @ 80 MHz;
-90 dBm @ 40 MHz;
-93 dBm @ 20 MHz

 

Antenna
Gain 14 dBi
Beamwidth ( 3 dB ):  70° azimuth
Electrical Downtilt:  None
Front-to-Back Ratio: >30 dB
Cross-Polar Isolation: >20 dB or greater
Polarization: Circular, 4 alternating panels

 

 

Physical
Dimensions: 314 mm (12.36”) height
142.44 mm (5.61”) width
Weight: 1.75 kg (3.85 lbs)
Enclosure Characteristics: Outdoor UV-stabilized engineered polymer
Wind Survivability: 200 km/h (125 mph)
Wind Loading: 7.72 kg @ 160 km/h
17.03 lbs @ 100 mph
Mounting: Dual-pole strap feed points integrated into metal base with integrated curvature for contact with mounting poles

 

Power
Max Power Consumption: 25 W
System Power Method: 802.3 at compliant
System Lightning & ESD Protection: 6 kV
PoE Power Supply: 802.3at and Passive POE compliant, 48-56 V Power over Ethernet supply with IEC61000-4-5 surge protection

 

Environmental
Outdoor Ingress Protection Rating: IP67
Operating Temperature: -40°C to +55°C (-40°F to 131°F)
Operating Humidity: 5 to 100% condensing
Operating Altitude: 4,420 m (14,500’) maximum
Shock & Vibration: ETS 300-019-2-4 class 4M5

 

Features
Gigabit Ethernet: 10/100/1000-BASE-T
Synchronization: GPS+GLONASS allows for network-wide sync and interference avoidance
Collocation: 1PPS GPS Tx/Rx synchronization for same tower collocation and channel reuse
Network Processing: Advanced AP control for capacity and subscriber management
Management Services: Mimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring; HTTPS; HTML 5-based Web UI; 2.4 GHz 802.11b/g/n radio for local management access
Smart Spectrum Management: Active scan monitors/logs ongoing RF interference across channels
(no service impact) ; Dynamic auto-optimization of channel and bandwidth use
Security: WPA2 PSK & Enterprise 802.1x; Radius provisioning, COA, DM; 128-bit AES with hardware acceleration
VLANs: Per subscriber VLAN; Q-in-Q, triple tagging; Management VLAN
QoS: Supports 4 pre-configured QoS levels
GPS Location: GNSS1 (GPS + GLONASS)
Traffic Shaping: Per CPE UL/DL commit and maximum rate shaping
Access Control List: Permit, deny, and remark layer 2 and layer 3 traffic flows

 

Regulatory and Compliance
Approvals: FCC Part 15.407 and Part 90Y, IC RSS210 and RSS111, CE, ETSI 301 893/302 502
RoHS Compliance: Yes
Safety: UL/EC/EN/ 60950-1 + CSA-22.2
SOLUTIONS