XWR3400 Series

Industrial Modbus LTE 4G cellular Router

Cellular Routers

Specifications

XWR3400 Series

Key Features:

Industrial Modbus LTE 4G cellular Router
• High-performance industrial-grade wireless module / 32-bit communication processor
• Metal shell, protection grade IP30. Metal shell, and protection grade IP30, Wide power
input range 5~36V
• WDT Watchdog design
• Adopt a complete anti-drop mechanism to ensure that the data terminal is
always online
• Built-in 1.5KV electromagnetic isolation protection for Ethernet interface
RS232/RS485 interface power and data isolation, in line with CSA,
UL and IEC standards
• SIM/UIM card interface built-in 15KV ESD protection
• Built-in reverse phase protection and over-voltage protection for power interface
• Standard RS232 or RS485/RS422 (Optional), Ethernet and WIFI Interface
• Provide standard wired WAN port (support standard PPPOE protocol) ,
Plug and Play Multiple working mode options
• Configuration and maintenance interface
• Support DIN rail
• Support local and remote WEB mode or CLI mode
• Multiple WAN connection methods, include static IP, DHCP, PPPOE,
3G/UMTS/4G/LTE, DHCP-4G/5G, 3G/4G/5G and wired WAN dual-link
backup（optional）
• VPN client PPTP/L2TP/IPSEC（only available in VPN version ） VPN sever
PPTP/L2TP/IPSEC（only available in VPN version） Remote management
SYSLOG/SNMP/TELNET/SSH/HTTPS
• Support local upgrade and remote upgrade， Import and export configuration files
NTP / Built in RTC
• MAC address clone , WIFI support 802.11b/g/n/ac, support WIFI AP /AP Client/bridge
mode etc. (optional）
• WIFI support WEP/WPA/WPA2 encryption
• Support multiple online and offline trigger modes Support APN/VPDN ,DHCP server
/ DHCP client/DHCP binding MAC/DDNS/NAT/DMZ/QOS Support TCP/IP/UDP/FTP
（Optional）/HTTP and other network protocols
• Support SPI firewall, access control, URL filter, IPV6/IPV4, 5G LAN, lock frequency,
lock resident, EOIP, bridge mode, VxLAN, virtual IP, GRETAP, etc, traffic statistics,
real-time display of data transmission rate

Technical Specifications

Cellular Specification
Module	Industrial grade wireless module
Frequency	Support for FDD LTE: Band 1/3, Band 2/4/5/13/17/25 (Optional) Support CDMA 1XRTT/EVDO 800/1900MHz Support the whole network (Optional) : TDD-LTE, FDD-LTE, EVDO, WCDMA, TD-SCDMA, CDMA1X, GPRS/EDGE
Bandwidth	FDD LTE (Downlink 100Mbps, Uplink 50Mbps) , TDD LTE (Downlink 61Mbps, Uplink 18Mbps) CDMA2000 1X EVDO Rev A (Downlink 3.1Mbps, Uplink 1.8Mbps) , WCDMA (Downlink 42Mbps, Uplink 5.76Mbps) , TD-SCDMA (Downlink 4.2Mbps, Uplink 2.2Mbps)
Power	< 23dBm
Sensitivity	<- 93.3dBm
WIFI Specification
Frequency	Support IEEE802.11b/g/n
Bandwidth	IEEE802.11b/g：54Mbps , IEEE802.11n：150Mbps
Security	Support WEP, WPA, WPA2 and other encryption methods, WPS (Optional)
Power	20dBm（11n），24dBm（11g），26dBm（11b）
Sensitive	<-72dBm @ 54Mbps
Hardware System
CPU	Industrial-grade 32-bit communication processor
FLASH	16MB, Extensible to 32MB
DDR3	128MB
Interfaces
WAN	1 x 10/100M Ethernet （RJ45） , Auto MDI/MDIX, Built-in 1.5KV electromagnetic isolation protection
LAN	4 x 10/100M Ethernet （RJ45）, Auto MDI/MDIX, Built-in 1.5KV electromagnetic isolation protection
Serial	1 x RS232(RS422/RS485), Built-in 1.5KV electromagnetic isolation protection Data bit：5, 6, 7, 8 Stop bit：1, 1.5(Optional), 2 Calibration: null, even, odd, SPACE(Optional) and MARK (Optional) Baud rate：2400~115200bits/s
Indicators	“PWR”, “SYS”, “WIFI”, “SIM”, “Online”, “Signal Strength”
I/O Port	6-pin 3.5mm wiring terminal, 2 inputs, 1 output, 1 relay; Controlled by Modbus protocol Input high level: 5 to 30 VDC Input low level: 0 to 3 VDC Load current: 50mA @ 30VDC Relay load 1A 250V AC/ 30V DC
Antenna	Cellular：2 standard SMA female antenna interfaces, characteristic impedance 50 ohms WIFI：1 standard SMA male antenna interfaces, characteristic impedance 50 ohms GPS: 1 calibrated SMA male antenna interface, characteristic impedance 50 ohms
SIM/UIM	Standard drawer type user card interface , Support 1.8V/3V SIM/UIM card, built-in 15KV ESD protection
Power	Terminal power socket
Reset button	2 bins terminal power socket, built-in power reverse protection and overvoltage protection

Power Supply
Standard	DC 12V/1.5A
Range	DC 5 ~36V
Consumption	<500mA (12V)
Physical Properties
Shell	Metal shell, protection grade IP68
Size	134.8 x 115.7 x 45mm (Does not include antenna and mounting parts)
Weight	520g
Others
Operating Temperature	-35~+75ºC（-31~+167℉）
Storage Temperature	-40~+85ºC（-40~+185℉）
Relative Humidity	95% (No condensation)