A5c Connectorized 4×4 Access Point

With the fastest client speeds and great access point capacity, along with local and network-wide spectrum reuse, the Mimosa A5c delivers the highest possible scale for any unlicensed fixed wireless network.

Microwave Solutions

Request a quote

Specifications

A5c Connectorized 4×4 Access Point

Key Features:

SUPER FOR SECTORS

The fastest client station, the highest capacity and performance of a reusable network base are the main features of the MIMOSA A5c Access Point. Dedicated to work over longer radio connection distances supported by GPS synchronization.

Performance
Max Throughput	Up to 1.0 Gbps IP (1.7 Gbps PHY)
Client Capacity	100 Clients (WiFi Interop); 44 Clients (SRS
Wireless Protocols	Wi-Fi Interop Mimosa GPS Sync (TDMA)
Radio
MIMO & Modulation	4×4:4 MIMO OFDM up to 256QAM
Bandwidth*	20/40/80 MHz channels Tunable in 5 MHz increments for GPS Sync Tunable to standard WiFi Channels for WiFi Interop
Frequency Range	GPS Sync: 4900-6400*** MHz WiFi Interop: 5170-5835 MHzRestricted by country of operation (new US/FCC 5600-5650 support)
Max Output Power	30 dBm
Sensitivity ( MCS 0 )	-87 dBm @ 80 MHz -90 dBm @ 40 MHz -93 dBm @ 20 MHz
Power
Max Power Consumption	25 W
System Power Method	802.3at compliant
System Lightning & ESD Protection	6 kV
PoE Power Supply	Passive PoE compliant, 48-56 V Power over Ethernet supply with IEC61000-4-5 surge protection
Physical
Dimensions	Height: 300 mm (11.81″) Width: 151 mm (12.40″) Depth: 85 mm (3.35″)
Weight	1.75 kg (3.86 lbs)
Enclosure Characteristics	Outdoor UV-stabilized engineered polymer with integrated mounting panel
Mounting	Dual pole strap mount and slip on mount for comparable antennas
Connector Type	Female Type N (x4)
Environmental
Outdoor Ingress Protection Rating	IP67
Operating Temperature	-40°C to +55°C (-40°F to 131°F)
Operating Humidity	5 to 100% condensing
Operating Altitude	4420 m (14500′) maximum
Shock & Vibration	ETS 300-019-2-4 class 4M5
Features
Gigabit Ethernet	10/100/1000BASE-T
Synchronization	GPS + GLONASS allows for network-wide sync and interference avoidance
Collocation	1PPS GPS Tx/Rx synchronization for same tower collocation and channel reuse
Network Processing	Advanced AP control for capacity and subscriber management
Access Control Lists	Permit, Deny, and Remark Layer 2 and Layer 3 traffic flows
Traffic Shaping	Per CPE UL/DL commit and maximum rate shaping
Management Services	Mimosa Cloud monitoring and management; SNMPv2 & Syslog legacy monitoring; HTTPS, HTML 5-based Web UI (2.4 GHz WiFi management module no longer available as of December 2020)
Smart Spectrum Management	Active scan monitors/logs ongoing RF interference across channels (no service impact) Dynamic auto-optimization of channel and bandwidth use
Security	WPA2 + Mimosa 802.1x RADIUS Management VLAN support
QoS	Supports 4 pre-configured QoS levels
GPS Location	GNSS-1 (GPS + GLONASS)
VLANs	Per subscriber VLAN; Q-in-Q, triple tagging; Management VLAN
Regulatory + Compliance
Approvals	FCC Part 15.407 and Part 90Y, IC RSS210, CE, ETSI 301 893/302 502
Other National Regulations
RoHS Compliance	Yes
Safety	UL/EC/EN/ 60950-1 + CSA-22.2

* 4.9 GHz uses 20 MHz channel widths

*** A5/A5c extended frequency, above 6.2 GHz, requires P/N 100-000xx-01

A5

by Mimosa

A5 Point-to-Multipoint Access Point

Specifications

A5x PTMP ACCESS POINT

by Mimosa

Cost-Effectively Expand Your PTMP Network

Specifications

C5c

by Mimosa

Industry-Leading Price Performance for Fixed Wireless Markets

Specifications

C5x CLIENTPTP BACKHAUL

by Mimosa

The Mimosa C5x is the industry’s most versatile, integrated radio with four modular twist-on antenna options. The ultra-rugged solution provides extended frequency operation from 4.9–6.4 GHz, with best-in-class noise immunity. Delivering the ultimate in flexibility and cost efficiency, the C5x is the go-to PTP or PTMP solution for 5 GHz deployments.

Specifications