N5-45×4

19 or 22dBi
Gain (2-port or 4-port)

43dB
Front-to-Back Ratio

4.9–6.4GHz
Wideband Support

High-Speed Internet Access

Public Safety Networks

Fixed 5G Wireless Deployments

UHD Security Camera Connectivity

 Reject Noise and Synchronize

Overcoming noise at tower sites is key to scaling capacity. The N5-45×4 delivers industry-leading side lobe rejection and an unprecedented 43 dB front-toback (FTB) performance — the highest FTB ratio of any sector or horn antenna in the industry. When used in combination with the Mimosa A5c access point, there’s no higher performance tower solution to deliver full, 2x spectrum reuse.

 Wideband Operation

Supporting 4.9 GHz public safety applications and multipoint licensed operation up to 6.4 GHz (where regulations allow), the N5-45×4 provides an additional 800 MHz of spectrum beyond the crowded 5.15–5.85 GHz unlicensed channels.

 Go the Distance

The Mimosa N5-45×4 offers the best of both worlds — a long distance, high-gain sector with the superior noise isolation of a horn. Competitive sectors offer highgain, but fail to reduce side lobe and front-to-back noise. Symmetric horn antennas achieve good noise isolation, but typically offer lower gain and inefficient symmetrical ground coverage patterns.

 Compatible with Third-Party Radios

In addition to the 4×4 MIMO Mimosa A5c, the N5-45×4 will support two concurrent third-party 2×2 MIMO radios operating on separate channels to double the coverage capacity at a tower site and avoid the congestion of the unlicensed 5 GHz band.

 Designed for Beamforming

Paired with the 4×4 MIMO Mimosa A5c, the Mimosa N5-45×4 provides an easy-to-aim, 9º vertical beamwidth coverage area with a narrow, 4.5º signal and +3 dB gain per client. In the uplink direction, the A5c’s digital phasing works with the 4 port N5-45×4, adding +3 dB of receive gain.

Antenna

Gain

22 dBi (+3 dBi from beamforming)

Polarization

Dual-slant 45º

Azimuth Beamwidth (4 dB):

45º

Azimuth Beamwidth (3 dB):

42º

Elevation Beamwidth (3 db):

9º

Electrical Downtilt:

2º

Front-to-Back Ratio (min):

43 dB

Cross-Polar Isolation:

>30 dB

Port-to-Port Isolation:

>10 dB

Impedance:

50 Ω

Max Input Power

30 dBm

Physical

Dimensions:

Height: 734 mm (28.88”)
Width: 143 mm (6.63”)
Depth: 76 mm (3.0”) including connectors

Shipping Box Dimensions:

Height: 981 mm (38.62”)
Width: 166 mm (6.53”)
Length: 105 mm (4.13”)

Weight:

4.08kg (9.0 lbs)

RF Connectors:

4 N-type female (includes four 1 meter LMR 240 Type-N to Type-N cables)

RF Connectors Position:

Back of antenna, near center

Enclosure Characteristics:

Outdoor, UV stabilized, engineered polymer

Mounting:

Galvanized steel, dual attached pole mount with 20º mechanical up or down tilt. Two mounting brackets included. For pole sizes, maximum is 3.5” (90 mm) and minimum is 1.5” (38 mm).

Wind Survivability:

200 km/h (125 mph)

Wind Loading:

4.77 kg @ 160 km/h (10.49 lbs @ 100 mph)

Environmental

Outdoor Ingress Protection Rating:

IP55

Operating Temperature:

-40°C to +55°C (-40°F to 131°F)

Operating Humidity:

5 to 100% condensing

Operating Altitude:

4,420 m (14,500’) max

Shock & Vibration:

ETS 300-019-2-4 class 4M5

Regulatory and Compliance

RoHS Compliance:

Yes