XWR2450 Series

Key Features:

4-Port 4G LTE Industrial Router

• NXP Industrial grade processor
• Global 4G LTE CAT4/3G network with dual SIM cards
• Rugged enclosure, optimized for DIN rail or shelf mounting
• Wide operating temperature range from -40°C to +70°C
• 3 years warranty included
• Embedded Python SDK for secondary development
• Modular design with flexible connections: Ethernet, I/O, Serial, Wi-Fi, GPS
• Support 802.11 b/g/n, as AP or client mode (backup WAN link for 4G/3G)
• Support rich protocols like SNMP, Modbus Bridging, RIP, OSPF
• Automated failover/failback between Ethernet, Cellular (dual SIM), Wi-Fi
• Secure transmission VPN tunnels IPsec/OpenVPN/GRE/L2TP/PPTP/DMVPN
• Embeds hardware watchdog to automatically recover from various failures
• Secured centralized authentication AAA (Radius, TACACS+, LDAP, Local)
• Device Hub for mass configuration, and centralized remote management

Product Details

Technical Specifications

Cellular Specification
Standard and Band FDD-LTE: B1/B3/B7/B8/B20/B28A
TDD-LTE: B38/B40/B41
WCDMA: B1/B8
EDGE: B3/B8
Bandwidth

 

FDD-LTE: Downstream rate 150Mbps, uplink rate 50Mbps
TD-LTE: Downstream rate 130Mbps, uplink rate 30Mbps
DC-HSPA+: Downstream rate 42Mbps, uplink rate 5.76Mbps
WCDMA: Downstream rate 384Kbps, uplink rate 384Kbps
EDGE: Downstream rate 296Kbps, uplink rate 236.8Kbps
GPRS: Downstream rate 107Kbps, uplink rate 85.6Kbps
Transmit Power < 23dBm
Sensitivity < -97dBm
Hard System
Module Quectel EC25-EUX
CPU ARMCortex-A7, 528MHz
Memory 128 MB DDR3 RAM and 128MB Flash
Extendable Storage 1× Micro SD Slot
Interface
Cellular Interface 2× 50 Ω SMA Female Antenna Connectors
SIM Slots 2 (Mini SIM-2FF)
Ethernet Interface 5× 10/100M RJ45 ethernet port, Full or half duplex (Auto-Sensing), 1× WAN + 4× LAN
POE (Optional) 4× 802.3af/at PoE PSE on LAN Ports
Serial 1× RS232 + 1× RS485 (2 × RS485 Hardware Optional)
Wi-Fi (Optional) 1× 50Ω SMA Connector (Center PIN : RP-SMA Female), IEEE802.11b/g/n,2.4GHz, 802.11b:16 dBm+/-1.5 dBm (11Mbps),  802.11g:14dBm +/-1.5dBm (54Mbps) 802.11n:13 dBm+/-1.5 dBm (65Mbps,HT20/40MCS7)
GPS (Optional) 1× 50Ω SMA Connector (Center PIN :SMA Female), NMEA0183,PMTK
DI/DO (Optional) 1× DI (dry contact) + 1× DO (wet contact), Galvanic Isolation, 3.5mmTerminal Block, 0.3A@30VDC (DO)
Power Interface 2-pin 5.08mm Terminal Block
Reset Button Can reset router’s configuration to default factory setting by this button
LED Indicators 1×POWER,1×SYSTEM, 1×SIM, 1×Wi-Fi (optional), 3×Signal strength
Built-in Watchdog ,Timer
 Software
Network Protocols IPv4/IPv6,PPP,PPPoE,SNMPv1/v2c/v3,TCP,UDP,DHCP,RIPv1/v2, OSPF ,DDNS ,VRRP ,HTTP ,HTTPS ,DNS ,ARP ,QOS,SNTP ,Telnet ,VLAN , SSH ,etc.
VPN
DMVPN, IPsec,OpenVPN,PPTP,L2TP,GRE
Security Access Control, DMZ ,Port Mapping ,MAC Binding ,SPI Firewalls, DoS & DDoS Protection ,Filtering (IP & Domain), IP Pass through
Management Web,CLI,SMS,On-demanddialup,SNMPv1/v2/v3,DeviceHub
 AAA Radius, Tacacs +,LDAP ,Local Authentication
Multilevel Authority Multiple Levels of User Authority
Reliability VRRP,WAN Failover ,Dual SIM Backup
Serial Port Transparent (TCP Client/Server, UDP),Modbus Master/Slave, Modbus Gateway (Modbus RTU to Modbus TCP)
Power
Input Voltage DC 9-48, Surge protection, Reverse Polarity protection
Power Consumption 3.9W Typical ,Max 4.6W (Non-POE mode)
Physical Properties
Casing Metal casing, IP30 protection level, suitable for most industrial control applications. Installation Desktop, Wall, and Din-Rail mounting
Dimensions 135x103x45mm (5.31×4.06×1.77in)
Weight 485g
Environmental
Operating Temperature -40~+70℃
Storage Temperature -40~+85℃
Relative Humidity 0-95% (non-condensing)
Ethernet Isolation 1.5 kV RMS
Approvals
Regulatory CE,FCC,RCM,NBTC,SPDDI
Carrier PTCRB,AT&T
Environmental RoHS
EMC EN55032,EN55035
EMS IEC 61000-4-2 Level 3, IEC 61000-4-3 Level 2, IEC 61000-4-4 Level 2, EMS IEC 61000-4-5 Level 2, IEC 61000-4-6 Level 3, IEC 61000-4-8 Level 1, IEC 61000-4-11 Level 3
Radio Frequency EN 301 489-1/17/19/52, EN 301 511, EN 301 908-1/2/13, EN 303 413, Radio Frequency EN300 328
Safety EN62368-1
SOLUTIONS